QUANTUM CORPORATION DLT 4000 (INTERNAL) Device Type Internal Tape Drive Interface SCSI-2 Fast Wide Format DLT Sustained Transfer Rate 1.5 MBPS 3.0 MBPS (compressed) Size 5.25 in. full height View Top CONNECTIONS Function Label Proprietary Power connector CN1 USER CONFIGURABLE SETTINGS Setting Label Position » Factory configured - do not JP1/Pins 1 & Unidentified alter. 2 » Factory configured - do not JP1/Pins 5 - Unidentified alter. 26 » Factory configured - do not JP2/Pins 1 - Unidentified alter. 26 » Factory configured - do not JP3/Pins 1 - Unidentified alter. 6 » Remote ID enabled JP4/Pins 1 & Closed 2 Remote ID disabled JP4/Pins 1 & Open 2 Parity check disabled JP4/Pins 3 & Closed 4 Parity check enabled JP4/Pins 3 & Open 4 » Factory configured - do not JP5/Pins 1 - Unidentified alter. (Loader Connector) 10 DRIVE SELECT ID Drive ID JP4/Pins 5 & 6 JP4/Pins 7 & 8 JP4/Pins 9 & 10 0 Open Open Open 1 Open Open Closed 2 Open Closed Open 3 Open Closed Closed 4 Closed Open Open 5 Closed Open Closed 6 Closed Closed Open 7 Closed Closed Closed Note: Pins 1 & 2 of JP4 are to be closed when selecting SCSI IDs. TERMINATION POWER SELECTION Setting JP1/Pins 3 & 4 » TERMPWR supplied by drive Closed TERMPWR supplied by SCSI interface Open to drive MANUFACTURERS RECOMMENDED MEDIA Tape Capacity Without Capacity With Compression Compression DLT tape III 10GB 20GB 1100ft. DLT tape IIIxt 15GB 35GB 1800ft. DLT tape IV 20GB 40GB 1800ft. DIAGNOSTIC LED(S) LED Color Status Condition Write Orange On Cartridge is Protect write-protected. Write Orange Off Cartridge is Protect write-enabled. Tape In Use Yellow Blinking Cartridge is loaded and tape is moving. Tape In Use Yellow On Cartridge is loaded and ready for use. Use Cleaning Yellow On Drive head requires Tape cleaning, or tape is bad. Use Cleaning Yellow Remains on after Cleaning tap attempted to Tape cleaning tape clean drive head, tape unloaded expired, cleaning not performed. Use Cleaning Yellow Turns on when Problem data cartridge. Tape data cartridge Attempt different loaded after cartridge. cleaning Use Cleaning Yellow Off Cleaning complete, or Tape cleaning unnecessary. Operate Green On Okay to operate cartridge Handle insert/release handle Operate Green Off Do not operate cartridge Handle insert/release handle Operate Green Blinking Close handle and wait for Handle steady green indication before inserting cartridge. 2.6 Yellow On Indicates tape is recorded in 2.6GB format. 2.6 Yellow Blinking Indicates tape is recorded in another density selected for a write from BOT. 6.0 Yellow On Indicates tape is recorded in 6.0GB format. 6.0 Yellow Blinking Indicates tape is recorded in another density selected for a write from BOT. 10.0/15.0 Yellow On Indicates tape is recorded in 10.0GB format if DLT™ tape III is used. Indicates tape is recorded in 15.0GB format if DLT™ tape IIIxt is used. 10.0/15.0 Yellow Blinking Indicates tape is recorded in another density selected for a write from BOT. 20.0 Yellow On Indicates tape is recorded in 20.0GB format. DIAGNOSTIC LED(S) LED Color Status Condition 20.0 Yellow Blinking Indicates tape is recorded in another density selected for a write from BOT. Compress Yellow On Compression mode enabled (10.0, 15.0, and 35.0GB densities only). Compress Yellow Off Compression mode disabled. Density Yellow On Density from front panel Override selected. Density to be selected by the host (automatic). Density Yellow Off You are in density Override selection mode. Note: All four right side or all seven left side indicators ‘On’ designates that the Power-on self-test (POST) is starting. All four right side or all seven left side indicators ‘Blinking’ designates that an error has occurred in the POST; clear the error by pressing the unload button, or turn drive power off and then on again. If error remains service is required.